FF8/FileFormat X

By MaKiPL. Thanks for help in research for: shakotay2 (XeNTaX), Halfer, Yagami Light. Complete list of original battle stages by Kaspar01: List of battle stages

Info

.X file is uncompressed 3D stage model with texture embedeed. The file contains unused info (not used by FF8 engine), camera data, movement, translations and geometry data.

Battle stages DOES NOT contain pointers to next sections. All pointers are HARDCODED in FF8.EXE. Click me for battle stage pointer list

Name	Usually starting with:	Description
Unused data	E8 FF BD 27 01 00 02	This data is unused by FF8 Engine
Camera data + movement	02 00 08 00 20 00	Camera animations, movement (pre-keyed)
Model section	06 00 00 00 (See geometry section info)	Divides to object (group) and it's sub-objects + vert/triangle grouping
Texture	01 00 00 00 09 (Always)	Contains one .TIM texture

How is this file handled by the engine?

FF8 loads specific file and reads it from hardcoded (written in FF8 code) position. This hardcoded position points to camera data. Camera data has size uint16, which is calculated and relative jump is made. Just after camera, a typical section based file handling is made.

Offset	Length	Description
0	uint32	Number of sections
4	uint32	Objects group #1 (NULL?)
8	uint32	Objects group #2
12	uint32	Objects group #3
16	uint32	Objects group #4
20	uint32	Texture [unused in code]
24	uint32	Texture
28	uint32	Relative to EOF

Objects group:

Offset	Length	Description
0	uint32	Number of sections
4	uint32	Pointer to Settings #1
8	uint32	Pointer to ObjectsList
12	uint32	Pointer to Settings #2
16	uint32	Relative to end_of_group

Objects list:

Offset	Length	Description
0	uint32	Number of objects
Num_of_obj*4	uint32	Relative pointer to segment (one .obj file) [01 00 01 00]

Settings 1:

Offset	Length	Description
0	uint16	Unknown, fixed 2?
2	sint16 (probably, or uint16)	Scale (01 is the smallest)
4	4 bytes	PADDING
8	4 bytes	Nothing?
12	4 bytes	Nothing?
16	2 bytes	if not FF FF, then model vanishes
18	sint16	X or Z Axis rot origin (Translation)
20	44 bytes	Left null for storing some engine data AFTER loaded in-game
64	2 bytes	if not FF FF or 00 00, then model vanishes
66	2 bytes	Nothing?
68	...up to end	Left null for storing some engine data AFTER loaded in-game

This might look difficult, but it's like multi-pointer file that starts at different location given by executable. See list at the beginning of this wiki to see which stages camera starts at which position (where FF8.exe really starts to read file as BattleStage) [FF8 stores whole file, even with useless data before camera] If this still makes trouble, see this video: TODO

Camera data

Starts at ~0x5d4 (see How the engine handles this file?). [.text:00509820]

Offset	Length	Description
0	uInt16	Fixed 02 00 (Unused in code)
2	uInt16	Relative jump to CameraSetting
4	uInt16	Relative jump to CameraAnimation
6	uInt16	Camera data size (starting from 0) [unused in code]
8	24 bytes	Camera Settings
32	?? bytes	Cameras

Camera Setting:

Offset	Length	Description
0	char (based on disassembly)	CameraAnimMode?
1	byte?	StopEnemyBeforeAnim?
2	Bitfield? (1B)	UHM?
3	???	DefaultEndofCameraPosition_Zoom?
4	???	???

Cameras:

Offset	Length	Description
0	uint16	NumberOfCameras
2 *(Camera)	uint16	Relative pointer to camera animation
2 *(Camera)+ 2	uint16	Relative pointer to EOF
2 *(Camera) + 4	CameraAnimation	CameraAnimation

Camera Animation:

Offset	Length	Description
0	uint16	NumOfKeypoints
2 *(KeypointID)	uint16	Relative pointer to camera Keypoint
2 *(NumOfKeypoints)+ 2	16 bytes? (NumOfKeypoints * 2)?	UNKNOWN
KeypointPointer	Keyframe	Keyframe

Keyframe:

Offset	Length	Description
0	UNKNOWN	UNKNOWN

Geometry

Geometry contains groups, that contains Triangles and/or quads poligons. Models always stars at 01 00 01 00, and needs to be after camera data, either it's not model itself, but some other data.

Group

Offset	Length	Description
0	4 bytes	Always 01 00 01 00 / Header of object
4	2 bytes	Uint16 / number of vertices.
6	Number of vertices * 6	Vertex data, short X; short Y; short Z;
6 + (Number of vertices *6)	(AbsolutePosition MOD 4) + 2	Padding
varies (just after above)	2 bytes	uint16 / number of triangles
varies (just after above)	2 bytes	uint16 / number of quads
varies (just after above)	4 bytes	padding
varies (just after above)	number of triangles * 20	Triangle data. If NumOfTriangles = 0, then instead of any triangle data, there's quad data.
varies (just after above)	number of quads * 24	Triangle data. If NumOfQuads = 0, then instead of any quad data, there's either next header 01 00 01 00, or end of group.

Triangle

Name	Type	Description
F1 (A)	uint16	A of face indice
F2 (B)	uint16	B of face indice
F3 (C)	uint16	C of face indice
U1	Byte	U of first texture coordinate
V1	Byte	V of first texture coordinate
U2	Byte	U of second texture coordinate
V2	Byte	V of second texture coordinate
CLUT_ID	UInt16 (BIT operated)*	Index to CLUT_ID operated by BIT (see below)
U3	Byte	U of third texture coordinate
V3	Byte	V of third texture coordinate
Special (see below / After QUAD table)	8 Byte	See below (after QUAD table)
Hide	Byte/Bool	Bool. Hides or shows texture
Red	Byte	Texture colourization (Red)
Green	Byte	Texture colourization (Green)
Blue	Byte	Texture colourization (Blue)
PSone GPU related	Byte	PSOne instruction

Quad

Name	Type	Description
F1 (A)	uint16	A of face indice
F2 (B)	uint16	B of face indice
F3 (C)	uint16	C of face indice
F4 (D)	uint16	D of face indice
U1	Byte	U of first texture coordinate
V1	Byte	V of first texture coordinate
CLUT_ID	UInt16 (BIT operated)*	Index to CLUT_ID operated by BIT (see below)
U2	Byte	U of second texture coordinate
V2	Byte	V of second texture coordinate
Special (see below)	8 Byte	See below (after table)
Hide	Byte/Bool	Bool. Hides or shows texture
U3	Byte	U of third texture coordinate
V3	Byte	V of third texture coordinate
U4	Byte	U of fourth texture coordinate
V4	Byte	V of fourth texture coordinate
Red	Byte	Texture colourization (Red)
Green	Byte	Texture colourization (Green)
Blue	Byte	Texture colourization (Blue)
PSone GPU related	Byte	PSOne instruction

Special Byte: This byte, needs to be divided to two bytes. So, for example, a 0xE5 needs to be treated like two bytes: 0x0E 0x05 Other way is to treat first one as 6 BIT's, and second one as 2 BIT.

Singular of char	Example	Description
First char/ 4 BIT	B2 --> 0B	Unknown
Second char / 4 BIT	B2 --> 02	Texture page number

CLUT ID

The most important bit's are the first two on one byte, and last two on last byte. Example: 00000000 00111100 (00 3C) should be read like this: 00111100 00000000 (3C 00) And the CLUT ID is revealed by watching this four bits: 001111[00 00]000000

Same applies to reading CLUT colors (16bits) where they are: 1b-T, 5b-B, 5b-G, 5b-R (Or RGBT if reordered as shown above)

Complete list (without replacing bit order - as is in HEX editor/memory):

CLUT ID	BIT	HEX
#1	00000000 00111100	00 3C
#2	01000000 00111100	40 3C
#3	10000000 00111100	80 3C
#4	11000000 00111100	C0 3C
#5	00000000 00111101	00 3D
#6	01000000 00111101	40 3D
#7	10000000 00111101	80 3D
#8	11000000 00111101	C0 3D
#9	00000000 00111110	00 3E
#10	01000000 00111110	40 3E
#11	10000000 00111110	80 3E
#12	11000000 00111110	C0 3E
#13	00000000 00111111	00 3F
#14	01000000 00111111	40 3F
#15	10000000 00111111	80 3F
#16	11000000 00111111	C0 3F

Texture

Contains one TIMs with various size 512x256, 673x256, 768x256 (8BPP).

UV calculation algorithm

Float U = (float)U_Byte / (float)(TIM_Texture_Width * 2) + ((float)Texture_Page/(TIM_Texture_Width * 2));

Texture page calculation

               Byte TPage = InputBytes[TexturePage_index] & 0F; //Bitwise TPage byte AND 0F, to delete first 4 bits
               int TPageINT = TPage * 128; //For 16 bit TIM's, the texture page is 128 sized

Example: 0xB2 byte is: 2*128 = 256

Face order / Translation/ triangulation

1.Quad wing order:

 ABCD ---> ABDC
 example:
  f 1 2 3 4
 to:
  f 1 2 4 3

2.Quad triangulation face order

 ABDC > ABD
        ACD (same for VT)
 example:
 f 1 2 4 3
 to:
 f 1 2 4
 f 1 3 4

3.Triangles VT order:

 A/T1 > A/T2
 B/T2 > B/T3
 C/T3 > C/T1
 Example:
 (Also with quad triangulation face order!)
 f 1/1 2/2 7/4 6/3
 to:
 f 1/1 2/2 7/4
 f 1/1 6/3 7/4
 where:
 A=1 B=2 C=6 D=7