FF7/PSX/Sound/AKAO sequence

Contents

Introduction

AKAO frames are most complicated frames in FF7 sound system. ("AKAO" is frame magic, probably developed by Minoru Akao, Square Enix sound programmer :) )

Frame is similar to MIDI sequence - it's custom tracker format for playing sequence sound, well tuned specially for PSX.

This frames are in all FF7 game modules: Field, Battle, Worldmap and in minigames.

All files with exension *.SND are AKAO.

• MINI/ASERI2.SND - Battle Arena theme
• MINI/SENSUI.SND - used in Submarine minigame
• ENEMY6/OVER2.SND - game over sequence
• ENEMY6/FAN2.SND - battle win "fanfare" sequence
• MOVIE/OVER2.SND - same game over sequence, don't know, why to duplicate data

Other AKAO frames are hard-wired in other files.

AKAO frame structure

Header (size: 16 bytes)

struct AkaoHeader
{
  static const uint8_t magic[4];  // "AKAO" C-string aka frame *MAGIC*
  uint16_t id;                    // frame ID, used for playing sequence
  uint16_t length;                // frame length - sizeof(header)
  uint16_t reverb_type;           // reverb type (range from 0 to 9)
  struct AkaoTimeStamp
  {
    uint8_t year_bcd;             // year (in binary coded decimal)
    uint8_t month_bcd;            // month (in binary coded decimal, between 0x01 - 0x12)
    uint8_t day_bcd;              // day (in binary coded decimal, between 0x01 - 0x31)
    uint8_t hours_bcd;            // hours (in binary coded decimal, between 0x00 - 0x23)
    uint8_t minutes_bcd;          // minutes (in binary coded decimal, between 0x00 - 0x59)
    uint8_t seconds_bcd;          // seconds (in binary coded decimal, between 0x00 - 0x59)
  } timestamp;
};

Channel info (size: 4 bytes + 2 bytes * <channels count>)

struct AkaoChannelInfo
{
  uint32_t mask;                         // represents bitmask of used channels in this frame
  uint32_t start_offsets[num_channels];  // offsets to channel opcode data
};

int num_channels = 0;
while (int bit = 0; ((info.mask & 0xFFFFFF) & (1 << bit)) != 0; bit++)
  num_channels++;

First there is 32-bit number (offset 0x10), which represents bitmask of used channels in this frame.

After this frame, there is <channels count> offsets to channel opcode data counting from current offset. Each offsets is a relative offset based on the address *next to* the offset itself. (This is a general rule for early versions of AKAO to interpret relative offsets.)

Channel Commands [AKAO Opcodes]

Most complicated part.

For every channel in AKAO frame there is set of commands to perform. This is similar to Field opcodes. Here I'll call this sound commands "opcodes". Every opcode has it's own number of arguments (from no-arguments, to 3 arguments).

Example (home-created AKAO frame):

Header

41 4b 41 4f - AKAO string

34 12 - frame ID: 0x1234

16 00 - frame length 0x16 in hex or 22 in decimal

04 00 - reverb type: 4 (large studio)

96 12 18 22 46 28 - unknown data

Channel info

01 00 00 00 - this indicates, that used only one channel

00 00 - offset to first channel opcodes: in our example 0x00 means that next to this offset is opcodes for first channel

Channel commands

e8 a8 66 - sets tempo, parameter 0x66a8

ea 00 50 - sets reverb depth

a8 55 - load sample 0x55 from INSTR.ALL to channel

aa 40 - sets channel volume

c2 - turns on reverb effect

a1 0c - sets volume pan

c8 - sets loop point

66 - 0x66 % 11 = 3 (3 means to take 3rd number from play length table), 0x66 / 11 = 9 (9 means to take pitch[9] from loaded instrument record index)

ca - returns to saved loop point with opcode c8

This example plays Chocobo "Whoo-Hoo" (instrument number 0x55) repeatedly.

Sound Opcode list

Opcode	Summary	Length	Operands
0xA0	Finish Channel	1
0xA1	Load Instrument	2	u8 instrument
0xA2	Overwrite Next Delta-Time Length	2	u8 delta_time
0xA3	Channel Master Volume	2	u8 volume
0xA4	Pitch Bend Slide	3	u8 length, s8 semitones
0xA5	Set Octave	2	u8 octave
0xA6	Increase Octave	1
0xA7	Decrease Octave	1
0xA8	Channel Volume	2	u8 volume
0xA9		3
0xAA	Channel Pan	2	u8 pan
0xAB		3
0xAC		2
0xAD		2
0xAE		2
0xAF		2
0xB0		3
0xB1		2
0xB2		2
0xB3		1
0xB4		4
0xB5		2
0xB6		1
0xB7		2
0xB8		4
0xB9		2
0xBA		1
0xBB		2
0xBC		3
0xBD		2
0xBE		1
0xBF		2
0xC0		2
0xC1		2
0xC2	Turn On Reverb	1
0xC3		1
0xC4		1
0xC5		1
0xC6		1
0xC7		1
0xC8	Loop Point	1
0xC9		2
0xCA	Return to Loop Point	1
0xCB		1
0xCC		1
0xCD		1
0xCE		1
0xCF		1
0xD0		1
0xD1		1
0xD2		1
0xD3		1
0xD4		1
0xD5		1
0xD6		1
0xD7		1
0xD8		2
0xD9		2
0xDA		2
0xDB		1
0xDC		2
0xDD		3
0xDE		3
0xDF		3
0xE8	Tempo	3	u16 tempo
0xE9		4
0xEA	Reverb Depth	3	u16 depth
0xEB		4
0xEC		3
0xED		1
0xEE		3
0xEF		3
0xF0		4
0xF1		4
0xF2		2
0xF3		1
0xF4		3
0xF5		1
0xF6		2
0xF7		3
0xF8		2
0xF9		1
0xFA
0xFB
0xFC		3
0xFD		3
0xFE		2
0xFF